Peugeot 3008 Key Fob Problems
The mid-sized SUV from Peugeot, the 3008, has plenty of positive attributes. It's stylish, handles well and has a big boot. Can it compete in the most competitive segment of the market perhaps?
If your Peugeot keyfob fails to function it is possible that it was exposed to soapy or clean tap water. You may have to remove the battery and clean it with electronic cleaner or isopropyl alcohol.
Dead coin battery
Peugeot key fobs are powered by the size of a coin. This power is used to control the remote locking system and other features. This battery has a finite life span and may wear out over the course of years of usage. Testing the voltage is a simple method to determine if a battery is damaged. A multimeter can determine the voltage between the battery's plus and poles. This test will determine if the battery is dead.
The receiver module could be the reason why your key fobs failing to function after having used your Peugeot 3008 a long time. The receiver module is responsible for capturing radio frequency signals from the key fobs and transferring them to the car's system. If the receiver module is in an issue, it will not be able transmit commands to the other modules in the car.
Another reason for a non-working key fob is moisture or sweat in the circuit board. This can lead to short circuits that drain the battery and can also cause the device to lose the remote locking feature of the key fob. If this happens, you should bring your key fob to a chip level service technician to fix it.
Water damage
Whether you dropped your key fob into the pool, tossed it in the wash or just left it in the rain for too long, water damage could be a real problem. Water is a great conductor and can quickly damage the components of the circuit board. It can also cause rusting of the traces of metal and other components on the key fob. A wet circuit could cause batteries to lose their charge.
If you have an extra key fob try using it to lock/unlock your Peugeot 3008 to eliminate the possibility that a dead coin battery is the source of the problem. Interference signals can cause your key fob not to function properly. They interfere with the signal sent by the receiver module. These interference signals can come from a wide range of sources including radio transmitters that are near.
If you hear sloshing noises emanating from your Peugeot 3008 while driving, it's due to a clogged condensate evaporator drain. You can test for this by finding the drain holes under your door and blowing compressed gas into them. You can also use flexible wire to wiggle the drain holes and clear any dirt that might have accumulated there. Air pockets can also be detected by sloshing noises.
The Keylab that is defective
The receiver module in the receiver module of a Peugeot 3008 is responsible for transmitting a remote keyless signal from the keyfob to a receiver in the car. The receiver module could be damaged and block the car from recognizing your key fob. Other reasons that could cause the issue include the battery being dead or water damage, or interference from electronic devices that operate on the same frequency as the key fob. In these instances, the car may show a message that says "card not detected" on the display.
There are several ways to solve this issue. You may try replacing the battery or programming the key fob. You can also utilize a spare key start the car. However, if the fob isn't working after all these steps, it could have a chip defective.
It is best to get rid of the chip and clean it using rubbing alcohol and paper towel. If the chip is damaged you should purchase an entirely new one. FB Series enclosures are designed for a key fob and come with a coin battery holder for cell batteries that fits the most commonly used key fob batteries. These enclosures are customizable with digital printing and CNC-machined cutouts. If your key fob was exposed to salted or dirty tap water, it's possible that the chip has been affected by the contamination.
A malfunctioning keyless entry system
If you are seeing "card not detected", this indicates that your vehicle is unable to receive the signal generated by your key fob. This could be due to a number of reasons, such as the battery being weak or dead. The issue is usually solved by pressing the start button on the key fob. In some instances however, you might require taking the key fob to an Peugeot dealer for further repairs.
The first step to troubleshooting the issue with a Peugeot 3008 key fob that's not able to unlock or lock the doors is to test its battery. Batteries are the most common cause of a malfunctioning fob however, there are other factors that can contribute to this issue as well. These include worn buttons and water damage.
If your Peugeot key fob has been exposed to clean tapwater, it is a good idea to remove the battery. Then, dry the electronic components with paper towel. You can also employ a cleaner or isopropyl ethanol for this. If the fob has been exposed to soapy or salty water, it's best to replace it.
If your key fob still does not work You can reset it by taking out the 12 volts battery for 15 minutes. Then, reconnect the negative cable first, followed by the positive cable.